Gigabyte GA-A75M-D2H - Page 42

BIOS Setup
- 42 -
Password Check
 Species whetherapasswordisrequired everytime thesystemboots,oronlywhenyou enterBIOS
Setup.Afterconguringthisitem,setthepassword(s)undertheSet Supervisor/User Password item in
the BIOS Main Menu.
Setup A password is only required for entering the BIOS Setup program. (Default)
System A password is required for booting the system and for entering the BIOS Setup
program.
HDD S.M.A.R.T. Capability
Enables or disables the S.M.A.R.T. (Self Monitoring and Reporting Technology) capability of your hard
drive. This feature allows your system to report read/write errors of the hard drive and to issue warnings
when a third party hardware monitor utility is installed. (Default: Disabled)
Away Mode
Enables or disables Away Mode in Windows XP Media Center operating system. Away Mode allows the
system to silently perform unattended tasks while in a low-power mode that appears off.
(Default: Disabled)
Full Screen LOGO Show
Allows you to determine whether to display the GIGABYTE Logo at system startup. Disabled displays
normal POST message. (Default: Enabled)
Init Display First
 Speciesthe rstinitiation ofthemonitordisplayfrom theinstalled PCIgraphicscard, PCIExpress
graphics card, or the onboard graphics.
Onboard  Setstheonboardgraphicsastherstdisplay.
PCI   SetsthePCIgraphicscardonthePCIslotastherstdisplay.
PEG   SetsthePCIExpressgraphicscardonthePCIEX16slotastherstdisplay.
(Default)
PEG1  SetsthePCIExpressgraphicscardonthePCIEX4slotastherstdisplay.