Gigabyte GA-A75M-D2H - Page 71

- 71 -
Appendix
C.ConguringRAIDsetinRAIDBIOS
EntertheRAIDBIOSsetuputilitytocongureaRAIDarray.Skipthisstepandproceedwiththeinstallationof
Windowsoperatingsystemforanon-RAIDconguration.
Step 1:
After the POST memory test begins and before the operating system boot begins, look for a message which
says "Press <Ctrl-F> to enter RAID Option ROM Utility" (Figure 2). Press <Ctrl> + <F> to enter the RAID
BIOS setup utility.
Step 2:
Main Menu
ThisistherstoptionscreenwhenyouentertheBIOSRAIDSetuputility.(Figure3).
To view the disk drives assigned to arrays, press <1> to enter the View Drive Assignments window.
To create an array, press <2> to enter the LDView/LDDeneMenu window.
To delete an array, press <3> to enter the Delete LD Menu window.
To view controller settings, press <4> to enter the ControllerConguration window.
Figure 3
RAID Option ROM Version 3.3.1540.11
(c) 2011 Advanced Micro Devices, Inc. All rights reserved.
NoArrayisdened..
Press <Ctrl-F> to enter RAID Option ROM Utility...
Figure 2
ViewDriveAssignments...........................[1]
LDView/LDDeneMenu...................... [2]
DeleteLDMenu....................................... [3]
ControllerConguration............................[4]
Option ROM Utility (c) 2011 Advanced Micro Devices, Inc.
Press1..4toSelectOption     [ESC]Exit
[KeysAvailable]
[MainMenu]