Gigabyte GA-AX370-Gaming 5 - Page 16

7) EC_TEMP1/EC_TEMP2 (Temperature Sensor Headers)
Connect the thermistor cables to the headers for temperature detection.
Pin No. Denition
1 SENSORIN
2 GND
1
1
EC_TEMP1 EC_TEMP2
Pin No. Denition
1 12V
2 G
3 R
4 B
DEBUG
PORT
G.QBOFM
1
8) LED_C1 (CPU Cooler LED Strip/RGB LED Strip Extension Cable Header)
 TheheadercanbeusedtoconnectaCPUcoolerLEDstriporastandard5050RGBLEDstrip(12V/G/R/B),
with maximum power rating of 2A (12V) and maximum length of 2m.
Connecting the CPU cooler LED strip:
Connect the connector of the CPU cooler LED strip (marked with an arrow) to Pin 1 (12V) of this header.
Pin No. Denition
1 12V
2 G
3 R
4 B
5 W
F_USB30
F_U
B_ 
F_  F_ 

_
B
BS_
B
SB_
B
_S

S_
_
B
_U
_
B


 
S  
 
123
 
123
 
123
 
123
1
1
1
1
BSS
S
_S 
SSU
 
1 2 3  
 S3
BSSS

U
 __ 3
F_USB3F
S  _
S  _
S  _
SF


B_
B_
F
_0
S
S
_0F
_F
_
_
__B


U
S  _S
_
USB0_B
B_
F_USB3

1
Before installing the devices, be sure to turn off the devices and your computer. Unplug the power
cord from the power outlet to prevent damage to the devices.
9) LED_C2 (RGB (RGBW) LED Strip Extension Cable Header)
 Theheadercanbeusedtoconnectastandard5050RGB(RGBW)LEDstrip(12V/G/R/B/W),withmaximum
power rating of 2A (12V) and maximum length of 2m.
ConnectoneendoftheRGB(RGBW)LEDstripextensioncabletothe
headerandtheotherendtoyourRGB(RGBW)LEDstrip.Theblack
wire (marked with a triangle on the plug) of the extension cable must be
connected to Pin 1 (12V) of this header. The 12V pin (marked with an
arrow) on the other end of the extension cable must be lined up with the
12V of the LED strip. Be careful with the connection orientation of the
LED strip; incorrect connection may lead to the damage of the LED strip.
12V
1
Black wire
12V of the
LED strip
Forhowtoturn on/off thelightsoftheRGB (RGBW) LED strip, refertotheinstructionson in
Chapter2,"BIOSSetup."
12V
1
Black wire
12V of the
LED strip
Connecting the standard LED strip:
ConnectoneendoftheRGBLEDstripextensioncabletotheheader
andtheotherendtoyourRGBLEDstrip.Theblackwire(markedwith
a triangle on the plug) of the extension cable must be connected to Pin
1 (12V) of this header. The 12V pin (marked with an arrow) on the other
end of the extension cable must be lined up with the 12V of the LED
strip. Be careful with the connection orientation of the LED strip; incorrect
connection may lead to the damage of the LED strip.
- 16 -