Gigabyte GA-B250M-D2V - Peripherals and Chipset Configuration; Peripherals Configuration

2-5 Peripherals
& Initial Display Output
 SpeciestherstinitiationofthemonitordisplayfromtheinstalledPCIExpressgraphicscardortheonboard
graphics.
IGFX   Setstheonboardgraphicsastherstdisplay.
PCIe1Slot SetsthegraphicscardonthePCIEX16slotastherstdisplay.(Default)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled.
& OnBoard LAN Controller
Enables or disables the onboard LAN function.
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled.
& AmbientLED
Enables or disables the onboard audio LED. (Default: On)
& IntelPlatformTrustTechnology(PTT)
Enables or disables Intel
®
PTT Technology. (Default: Disabled)
` OffBoardSATAControllerConguration
Displays information on your PCIe SSD if installed.
` TrustedComputing
Enables or disables Trusted Platform Module (TPM).
` SuperIOConguration
& Serial Port
Enables or disables the onboard serial port. (Default: Enabled)
- 29 -