Gigabyte GA-C1037UN-LA - BIOS Features

- 20 -
2-4 BIOSFeatures
& BootOptionPriorities
 Speciestheoverallbootorderfromtheavailabledevices.Forexample,youcansetharddriveasthe
rstpriority(BootOption#1) and DVD ROM drive as the second priority (BootOption#2). The list only
displaysthedevicewiththehighestpriorityforaspecictype.Forexample,onlyharddrivedenedasthe
rstpriorityontheHard Drive BBS Priorities submenu will be presented here.
 RemovablestoragedevicesthatsupportGPTformatwillbeprexedwith"UEFI:"stringonthebootdevice
list.TobootfromanoperatingsystemthatsupportsGPTpartitioning,selectthedeviceprexedwith"UEFI:"
string.
Or if you want to install an operating system that supports GPT partitioning such as Windows 7 64-bit, select
theopticaldrivethatcontainstheWindows764-bitinstallationdiskandisprexedwith"UEFI:"string.
& System Time
Sets the system time. The time format is hour, minute, and second. For example, 1 p.m. is 13:0:0. Use
<Enter>toswitchbetweentheHour,Minute,andSecondeldsandusethe<PageUp>or<PageDown>
key to set the desired value.
& Access Level
Displays the current access level depending on the type of password protection used. (If no password is
set, the default will display as Administrator.) The Administrator level allows you to make changes to all
BIOS settings; the User level only allows you to make changes to certain BIOS settings but not all.
` ATA Port Information
This section provides information on the device connected to each SATA port controlled by Intel
®
NM70
Chipset.
& Port 0/1/2/3
Enables or disables each SATA port. (Default: Enabled)
 ThisitemiscongurableonlywhenSATA Mode Selection is set to AHCI.
& Hot plug
Enables or disable the hot plug capability for each SATA port. (Default: Disabled)
 ThisitemiscongurableonlywhenSATA Mode Selection is set to AHCI.