GA-EG45M-UD2H Motherboard - 94 -
B-2. Configuring S/PDIF Out:
On the Digital Output screen, click the Default Format tab and then select the sample rate and bit depth.
Click OK to complete.
B-1. Configuring S/PDIF In:
On the Digital Input screen, click the Default Format tab to select the default format. Click OK to complete.
B. Configuring S/PDIF In and Out:
S/PDIF Out:
The S/PDIF out jacks can transmit audio signals to an external decoder for decoding to get the best
audio quality.
Connect a S/PDIF coaxial cable or a S/PDIF optical cable (either one) to an external decoder for
transmitting the S/PDIF digital audio signals.
S/PDIF Coaxial Cable
B. Conneting a S/PDIF out Cable
S/PDIF Optical Cable
To Next Page
Loading...
