Gigabyte GA-EP35C-DS3R User Manual

GA-EP35C-DS3R Motherboard - 92 -
B. Installing Windows Vista
(The procedure below assumes that only one RAID array exists in your system.)
Intel ICH9R SATA controllers:
Step 1:
Restart your system to boot from the Windows Vista setup disk and perform standard OS installation
steps. When a screen similar to that below appears, select Load Driver. (Figure 8).
Step 2:
Specify the location where the driver is saved, such as your floppy disk (Figure 9).
Figure 9
Figure 8

Gigabyte GA-EP35C-DS3R Specifications

General

Brand	Gigabyte
Model	GA-EP35C-DS3R
Category	Motherboard
Language	English