Gigabyte GA-EP43T-UD3L - Init Display First

- 49 - BIOS Setup
Full Screen LOGO Show
Allows you to determine whether to display the GIGABYTE Logo at system startup. Disabled displays
normal POST message. (Default: Enabled)
Backup BIOS Image to HDD
Allows the system to copy the BIOS image le to the hard drive. If the system BIOS is corrupted, it will
be recovered from this image le. (Default: Enabled)
Init Display First
Species the rst initiation of the monitor display from the installed PCI graphics card or the PCI Express
graphics card.
PCI Sets the PCI graphics card as the rst display. (Default)
PEG Sets the PCI Express graphics card as the rst display.