GA-EP45-DS4P/DS4 Motherboard - 50 -
Init Display First
Specifies the first initiation of the monitor display from the installed PCI graphics card or
PCI Express graphics card.
PCI Sets the PCI graphics card as the first display. (Default)
PEG Sets PCI Express graphics card on the PCI Express x16 slot as the first
display.
PEG2 Sets PCI Express graphics card on the PCI Express x8 slot as the first display.
PEG3 Sets PCI Express graphics card on the PCI Express x4 slot as the first display.
To Next Page
Loading...
