Gigabyte GA-F2A55M-HD2 - Administrator Password; User Password

- 36 -
& DisplayBootOptionControl
Allows you to select whether to enable the UEFI or legacy option ROM for the graphics controller.
Disabled Disables option ROM.
LegacyOnly  EnableslegacyoptionROMonly.(Default)
UEFI Only Enables UEFI option ROM only.
LegacyFirst  EnableslegacyoptionROMrst.
UEFIFirst   EnablesUEFIoptionROMrst.
 ThisitemiscongurableonlywhenCSM Support is set to Always.
& OtherPCIDeviceROMPriority
Allows you to select whether to enable the UEFI or Legacy option ROM for the PCI device controller other
than the LAN, storage device, and graphics controllers.
Legacy OpROM Enables legacy Option ROM only.
UEFIOpROM  EnablesUEFIOptionROMonly.(Default)
& Networkstack
Disables or enables booting from the network to install a GPT format OS, such as installing the OS from
theWindowsDeploymentServicesserver.(Default:DisableLink)
& Ipv4PXEBootSupport
 EnablesordisablesIPv4PXESupport.ThisitemiscongurableonlywhenNetworkstack is enabled.
& Ipv6PXEBootSupport
 EnablesordisablesIPv6PXESupport.ThisitemiscongurableonlywhenNetworkstack is enabled.
& Administrator Password
 Allowsyoutocongureanadministratorpassword.Press<Enter>onthisitem,typethepassword,and
thenpress<Enter>.Youwillberequestedtoconrmthepassword.Typethepasswordagainandpress
<Enter>.Youmustentertheadministratorpassword(oruserpassword)atsystemstartupandwhenentering
BIOS Setup. Differing from the user password, the administrator password allows you to make changes to
all BIOS settings.
& User Password
 Allowsyoutocongureauserpassword.Press<Enter>onthisitem,typethepassword,andthenpress
<Enter>.Youwillberequestedtoconrmthepassword.Typethepasswordagainandpress<Enter>.
Youmustentertheadministratorpassword(oruserpassword)atsystemstartupandwhenenteringBIOS
Setup. However, the user password only allows you to make changes to certain BIOS settings but not all.
To cancel the password, press <Enter> on the password item and when requested for the password, enter the
correctonerst.Whenpromptedforanewpassword,press<Enter>withoutenteringanypassword.Press
<Enter>againwhenpromptedtoconrm.