Gigabyte GA-F2A88X-D3H - Page 38

BIOS Setup
- 38 -
& CPU core Control
Allows you to determine whether to manually enable/disable CPU cores. Automatic mode allows the
BIOS to enable all CPU cores (number of cores available depends on the CPU being used). (Default:
Automatic mode)
& APM
Enables or disables Application Power Management. (Default: Enabled)
& Extreme Memory Prole (X.M.P.)
(Note)
Allows the BIOS to read the SPD data on XMP memory module(s) to enhance memory performance
when enabled.
Disabled Disables this function. (Default)
Prole1 Uses Prole 1 settings.
Prole2
(Note)
Uses Prole 2 settings.
& AMD Memory Prole (A.M.P.)
(Note)
Allows the BIOS to read the SPD data on AMP memory module(s) to enhance memory performance
when enabled. (Default: Disabled)
& System Memory Multiplier
Allows you to set the system memory multiplier. Auto sets memory multiplier according to memory SPD
data. (Default: Auto)
& Memory Frequency (MHz)
This value is automatically adjusted according to the BCLK Clock Control and System Memory
Multiplier settings.
(Note) This item is present only when you install a memory module that supports this feature.