& CSM Support
Windows 8 Features is set to Windows 8 or Windows 8 WHL.
& Boot Mode Selection
Allows you to select which type of operating system to boot.
UEFI and Legacy Allows booting from operating systems that support legacy option ROM or UEFI
Legacy Only Allows booting from operating systems that only support legacy Option ROM.
UEFI Only Allows booting from operating systems that only support UEFI Option ROM.
CSM Support is set to Always.
& LAN PXE Boot Option ROM
CSM Support is set to Always.
& Storage Boot Option Control
Allows you to select whether to enable the UEFI or legacy option ROM for the storage device controller.
Disabled Disables Option ROM.
UEFI Only Enables UEFI option ROM only.
CSM Support is set to Always.
& Other PCI Device ROM Priority
Allows you to select whether to enable the UEFI or Legacy option ROM for the PCI device controller other
Legacy OpROM Enables legacy option ROM only.
CSM Support is set to Always.
& Network stack
Disables or enables booting from the network to install a GPT format OS, such as installing the OS from
& Ipv4 PXE Support
Network stack is enabled.
& Ipv6 PXE Support
Network stack is enabled.
& PXE boot wait time
Network stack is enabled.
To Next Page
Loading...
