2-7 Power Management
& Resume by Alarm
If enabled, set the date and time as following:
AC power, or the settings may not be effective.
& HPET Timer
& Soft-Off by PWR-BTTN
Delay 4 Sec. Press and hold the power button for 4 seconds to turn off the system. If the power
button is pressed for less than 4 seconds, the system will enter suspend mode.
& AC BACK
Determines the state of the system after the return of power from an AC power loss.
Memory The system returns to its last known awake state upon the return of the AC power.
Always On The system is turned on upon the return of the AC power.
& Power On By Keyboard
Allows the system to be turned on by a PS/2 keyboard wake-up event.
Password Set a password with 1~5 characters to turn on the system.
Any key Press any key to turn on the system.
To Next Page
Loading...
