\BootDrv\UEFI RAID Utility folder in your motherboard driver
Step 1:
In BIOS Setup, go to BIOS Features and set Windows 8 Features to Windows 8 and CSM Support to Never.
Running the UEFI RAID Utility
as shown in Figure 3. To run the UEFI RAID utility, enter the following commands.
You can enter the commands at Shell or x
Figure 2
Figure 3
EFI Shell version 2.31 [4.653]
Current running mode 1.1.2
Device mapping table
fs0 : Removable HardDisk Alias hd15c0b blk0
PciRoot (0x0)/Pci (0x12, 0x2)/USB (0x2, 0x0)/HD (1.MBR,0xc3072e18, 0x1f80, 0xeea080)
blk0 : Removable CDRom Alias hd15c0b fs0
PciRoot (0x0)/Pci (0x12, 0x2)/USB (0x2, 0x0)/HD (1.MBR,0xc3072e18, 0x1f80, 0xeea080)
blk1 : BlockDevice - Alias (null)
PciRoot (0x0)/Pci (0x11, 0x0)/Unit (0x1)
blk2 : Removable BlockDevice - Alias (null)
PciRoot (0x0)/Pci (0x12, 0x2)/USB (0x2, 0x0)
Press ESC in 1 seconds to skip startup.nsh, any other key to continue.
Shell>
To Next Page
Loading...
