Gigabyte GA-F2A88XM-D3H - Installing the SATA RAID;AHCI Driver and Operating System


- 66 -
3-2 Installing the SATA RAID/AHCI Driver and Operating System

A. Installing Windows

Step 1:
You need to install the SATA RAID/AHCI driver during the OS installation. Use an alternative system to copy
Hw8_A88 folder
under BootDrv in the driver disk.
Step 2:

to load the driver appears, select Browse.
Step 3:





Hw7_A88 folder.
Step 4:
AMD-RAID Controller and click Next to load the driver
and continue the OS installation.
Figure 1