Gigabyte GA-F2A88XM-D3HP - Page 82

Appendix
- 82 -
Step 2:
Connect an audio device to an audio jack. The The current
connected device is dialog box appears. Select the device
according to the type of device you connect. Then click OK.
Step 3:
On the Speakers screen, click the Speaker Configuration
tab. In the Speaker Configuration list, select Stereo,
Quadraphonic, 5.1 Speaker, or 7.1 Speaker according to
the type of speaker configuration you wish to set up. Then
the speaker setup is completed.
The pictures to the right show the 7.1-channel speaker
configurations.
7.1-Channel Speakers:
Center/Subwoofer
Speaker Out
Front Speaker Out
RearSpeakerOut
Side Speaker Out
B. Configuring Sound Effect
You may configure an audio environment on the Sound Effects tab.