Gigabyte GA-F2A88XM-HD3P - Page 28

- 28 -
& OnboardUSB3.1Controller(ASMedia
®
USB 3.1 Controller)
Enables or disables the ASMedia
®
USB 3.1 controller. (Default: Enabled)
` GFXConguration
& Primary Video Device
Species the rst initiation of the monitor display from the installed PCI graphics card, PCI Express graphics
card or the onboard graphics.
IGD Video Sets the onboard graphics as the rst display.
NB PCIe Slot Video Sets the graphics card on the PCIe slot controlled by the CPU as the rst display.
(Default)
SB PCIe Slot Video Sets the graphics card on the PCIe/PCI slot controlled by the Chipset as the rst
display.
& Integrated Graphics
Enables or disables the onboard graphics function.
Auto The BIOS will automatically enable or disable the onboard graphics depending on
the graphics card being installed. (Default)
Disabled Disables the onboard graphics.
Force Always activates the onboard graphics, whether or not a PCI Express card is
installed.
& UMA Frame Buffer Size
This item is congurable only when Integrated Graphics is set to Force. Frame buffer size is the total
amount of system memory allocated solely for the onboard graphics controller. MS-DOS, for example, will
use only this memory for display. Options are: Auto (default), 32M, 64M, 128M, 256M, 512M, 1G, 2G.
& OnChipSATAChannel
Enables or disables the integrated SATA controllers. (Default: Enabled)
& OnChipSATAType
Enables or disables RAID for the SATA controllers integrated in the Chipset or congures the SATA controllers
to AHCI mode.
Native IDE Congures the SATA controller to IDE mode.
RAID Enables RAID for the SATA controller.
AHCI Congures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specication that allows the storage driver to enable
advanced Serial ATA features such as Native Command Queuing and hot plug.
(Default)
& OnChipSATAPort4-7Type(SATA34~SATA37connectors)
This option is congurable only when OnChipSATAType is set to RAID or AHCI. Congures the operating
mode of the integrated SATA3 4~SATA3 7 connectors.
As SATA Type The mode depends on the OnChip SATA Type settings. (Default)
IDE Congures the SATA3 4~SATA3 7 connectors to PATA mode.
& PORT0HotPlug~PORT7HotPlug
Enables or disable the hot plug capability for each SATA port. (Default: Disabled)
& SATAPoweronPORT0~SATAPoweronPORT7
Enables or disables each SATA port. (Default: Enabled)
` SuperIOConguration
& Serial Port A
Enables or disables the onboard serial port. (Default: Enabled)
& Parallel Port
Enables or disables the onboard parallel port (LPT). (Default: Enabled)