Hardware Installation- 31 -
English
21) PW1 / PW2 [C.R.S. (CMOS Reload Switch)]
Allows user to clear the CMOS and reboot the system simultaneously. C.R.S. provides conve-
nient default settings retrieve and jumper-free CMOS reload.
PW2(Blue)PW1(Red)
Definition
PW1 Clear CMOS + Power On
PW2 Power On / Off
20) COMA (COMA Connector)
Be careful with the polarity of the COMA connector. Check the pin assignment carefully while you
connect the COMA cable, incorrect connection between the cable and connector will make the
device unable to work or even damage it. For optional COMA cable, please contact your local
dealer.
Pin No. Definition
1 NDCDA-
2 NSINA
3 NSOUTA
4 NDTRA-
5 GND
6 NDSRA-
7 NRTSA-
8 NCTSA-
9 NRIA-
10 No Pin
1
2
9
10
To Next Page
Loading...
