GA-G1975X-C Motherboard - 50 -
English
for FSB(Front Side Bus) frequency=800MHz,
2.00 Memory Frequency = Host clock x 2.00.
2.66 Memory Frequency = Host clock x 2.66.
3.33 Memory Frequency = Host clock x 3.33.
3.00 Memory Frequency = Host clock x 3.00.
4.00 Memory Frequency = Host clock x 4.00.
1.50 Memory Frequency = Host clock x 1.50.
2.0- Memory Frequency = Host clock x 2.0-.
2.50 Memory Frequency = Host clock x 2.50.
Auto Set Memory frequency by DRAM SPD data. (Default value)
Memory Frequency (Mhz)
The values depend on CPU Host Frequency(Mhz) and System Memory Multiplier setting.
DIMM OverVoltage Control
Normal Supply DDRII voltage as DDRII required. (Default value)
+0.1V ~ +0.7V Increase DDRII voltage +0.1V ~ +0.7V.
PCI-E OverVoltage Control
Normal Supply PCI-E voltage as PCI-E required. (Default value)
+0.1V ~ +0.7V Increase PCI-E voltage +0.1V ~ +0.7V.
FSB OverVoltage Control
Normal Supply FSB voltage as FSB required. (Default value)
+0.05V ~ +0.35V Set FSB OverVoltrage Control to +0.05V ~ +0.35V.
CPU Voltage Control
Supports adjustable CPU Vcore from 1.7500V to 1.0625V. (Default value: Normal)
Normal CPU Vcore
Display your CPU's normal voltage.
CAS Latency Time
This feature allows you to select the CAS latency Time, When any DDRII DIMM is installed.
5 Set CAS latency Time is 5.
4 Set CAS latency Time is 4.
3 Set CAS latency Time is 3.
6 Set CAS latency Time is 6.
Auto Set CAS latency Time automatically. (Default value)
DRAM RAS# to CAS# Delay
This feature allows you to set the delay time that from the DRAM RAS# active to CAS#.
2 Set DDRII RAM RAS# to CAS# delay 2 SCLKs.
3 Set DDRII RAM RAS# to CAS# delay 3 SCLKs.
4 Set DDRII RAM RAS# to CAS# delay 4 SCLKs.
5 Set DDRII RAM RAS# to CAS# delay 5 SCLKs.
6 Set DDRII RAM RAS# to CAS# delay 6 SCLKs.
Auto Set DDRII RAM RAS# to CAS# delay time automatically. (Default value)
To Next Page
Loading...
