Gigabyte GA-H270-HD3P - Power

& PCH LAN Controller
Enables or disables the onboard LAN function. (Default: Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled.
& WakeonLANEnabe
Enables or disables the wake on LAN function. (Default: Enabled)
& HighPrecisionTimer
Enables or disables High Precision Event Timer (HPET) in the operating system. (Default: Enabled)
& IOAPIC24-119Entries
Enables or disables this function. (Default: Enabled)
2-7 Power
& PlatformPowerManagement
Enables or disables the Active State Power Management function (ASPM). (Default: Disabled)
& PEGASPM
 Allowsyouto conguretheASPMmodefor thedeviceconnected totheCPU PEGbus.Thisitemis
congurableonlywhenPlatformPowerManagementis set to Enabled. (Default: Enabled)
& PCH ASPM
 AllowsyoutoconguretheASPMmodeforthedeviceconnectedtoChipset'sPCIExpressbus.Thisitem
iscongurableonlywhenPlatformPowerManagementis set to Enabled. (Default: Enabled)
& DMI ASPM
 AllowsyoutoconguretheASPMmodeforbothCPUsideandChipsetsideoftheDMIlink.Thisitemis
congurableonlywhenPlatformPowerManagementis set to Enabled. (Default: Enabled)
& ACBACK
Determines the state of the system after the return of power from an AC power loss.
Always Off The system stays off upon the return of the AC power. (Default)
Always On The system is turned on upon the return of the AC power.
Memory The system returns to its last known awake state upon the return of the AC power.
- 34 -