Gigabyte GA-H55M-UD2H - Page 20

- 20 -Hardware Installation
DiplayPort
j
(Note 1)(Note 3)
DisplayPort is one of the new generation interface technologies that delivers high quality digital imaging
and audio, supporting bi-directional audio transmition. DisplayPort can support both DPCP and HDCP
content protection mechanisms. Connect the audio/video device that supports DisplayPort to this port. The
DisplayPort Technology can support a maximum resolution of 2560x1600p but the actual resolutions sup-
ported depend on the monitor being used.
Dual Display Congurations for the Onboard Graphics:
The table below shows the supported dual display congurations for the onboard graphics ports when
in the BIOS Setup program or when during the POST stage. There is no such limitation in operating sys-
tem environment.
(Note 1) To use the onboard D-Sub, DVI-D, HDMI, and DisplayPort
j
ports, you must install an Intel CPU
with integrated graphics.
(Note 2) The DVI-D port does not support D-Sub connection by adapter.
(Note 3) You can use only one of the onboard digital graphics ports (e.g. DisplayPort
j
, HDMI, and DVI-D)
for output when in the BIOS Setup program or when during the POST screens.
After installing the DisplayPort device, make sure the default device for sound playback is the Dis-
playPort device. (The item name may differ from operating system. For example, in Windows Vista,
go to Start>Control Panel>Sound>Playback and set the DisplayPort device as the default play-
back device. Refer to the HDMI settings information on the previous page for the conguration
dialog box.)
Combination Supported or Not
DVI-D + D-Sub Yes
DVI-D + HDMI No
DVI-D + DP
j
No
HDMI + D-Sub Yes
HDMI + DP
j
No
DP + D-Sub
j
No
Display
Matrix
j
Only for GA-H55M-UD2H