Gigabyte GA-H61N-D2V - Power Management Settings

- 32 -
2-7 Power Management
AC BACK &
Determines the state of the system after the return of power from an AC power loss.
Always Off The system stays off upon the return of the AC power. (Default) 
Always On The system is turned on upon the return of the AC power. 
Memory The system returns to its last known awake state upon the return of the AC power. 
Power On By Keyboard &
Allows the system to be turned on by a PS/2 keyboard wake-up event.
Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead.
Disabled Disables this function. (Default) 
Any Key Press any key to turn on the system. 
Keyboard 98 Press POWER button on the Windows 98 keyboard to turn on the system. 
Resume by Alarm &
Determines whether to power on the system at a desired time. (Default: Disabled)
If enabled, set the date and time as following:
OnBoard LAN Controller#1 &
Enables or disables the onboard LAN function. (Default: Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled.
SuperIOConguration `
This section provides information on the super I/O chip and allows you to congure the serial port and
parallel port.
Serial Port A &
Enables or disables the onboard serial port. (Default: Enabled)
Parallel Port &
Enables or disables the onboard parallel port. (Default: Enabled)
Intel(R) Smart Connect Technology `
ISCTConguration &
Enables or disables Intel Smart Connect Technology. (Default: Disabled)