Gigabyte GA-H67A-UD3H - Page 29

- 29 - Hardware Installation
13) F_1394_1/F_1394_2 (IEEE 1394a Headers)
 Theheadersconform to IEEE1394a specication.Each IEEE1394a headercanprovideoneIEEE
1394a port via an optional IEEE 1394a bracket. For purchasing the optional IEEE 1394a bracket, please
contact the local dealer.
PinNo. Denition
1 TPA+
2 TPA-
3 GND
4 GND
5 TPB+
6 TPB-
7 Power (12V)
8 Power (12V)
9 No Pin
10 GND
• Do not plug the USB bracket cable into the IEEE 1394a header.
• Prior to installing the IEEE 1394a bracket, be sure to turn off your computer and unplug the
power cord from the power outlet to prevent damage to the IEEE 1394a bracket.
• To connect an IEEE 1394a device, attach one end of the device cable to your computer and
then attach the other end of the cable to the IEEE 1394a device. Ensure that the cable is se-
curely connected.
DEBUG
PORT
G.QBOFM
10
9
2
1
14) COMA (Serial Port Header)
The COM header can provide one serial port via an optional COM port cable. For purchasing the op-
tional COM port cable, please contact the local dealer.
PinNo. Denition
1 NDCD-
2 NSIN
3 NSOUT
4 NDTR-
5 GND
6 NDSR-
7 NRTS-
8 NCTS-
9 NRI-
10 No Pin
10
9
2
1