Gigabyte GA-H97-D3H - C-1 UEFI RAID Configuration

- 61 -
Conguring SATA Hard Drive(s)
C-1.UEFIRAIDConguration
OnlyWindows8/8.164-bitsupportsUEFIRAIDconguration.
Step 1:
In BIOS Setup, go to BIOS Features and set Windows 8 Features to Windows 8 and CSM Support to Never
(Figure2).SavethechangesandexitBIOSSetup.
Step 2:
After the system reboot, enter BIOS Setup again. Then enter the Peripherals\Intel(R) Rapid Storage Technology
sub-menu(Figure3).
Figure 2
Figure 3