Gigabyte GA-J1800M-D2P - Advanced Settings

- 18 -
2-3 Advanced
& Resume by Alarm
Determines whether to power on the system at a desired time. (Default: Disabled)
If enabled, set the date and time as following:
Wake up day: Turn on the system at a specic time on each day or on a specic day in a month.
Wake up hour/minute/second: Set the time at which the system will be powered on automatically.
Note: When using this function, avoid inadequate shutdown from the operating system or removal of the
AC power, or the settings may not be effective.
& Power Loading
Enables or disables dummy load. When the power supply is at low load, a self-protection will activate causing
it to shutdown or fail. If this occurs, please set to Enabled. Auto lets the BIOS automatically congure this
setting. (Default: Auto)
& DDR Voltage Control
Allows you to set the memory voltage. Options are: Normal, 1.50V, 1.60V, Auto. Auto lets the BIOS
automatically congure this setting. (Default: Auto)
` Hardware Monitor
& CPU Temperature (DTS)/System Temperature
Displays current CPU/system temperature.
& CPU/System Fan Speed
Displays current CPU/system fan speeds.
& Vcore/VCC3/+12V/VCC/CPU_VAXG/3VDUAL/DDR1_35VIO
Displays the current system voltages.
` Intel(R) Smart Connect Technology
& ISCT Support
Enables or disables Intel
®
Smart Connect Technology. (Default: Disabled)
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Main
Resume by Alarm [Disabled]
Wale up day 0
Wake up hour 0
Wake up minute 0
Wake up second 0
Power Loading [Auto]
DDR Voltage Control [Auto]
` Hardware Monitor
` Intel(R) Smart Connect Technology
` SIO Misc Functions
` CPU Conguration
` PPM Conguration
` Thermal Conguration
` IDE Conguration
` Network Stack Conguration
` CSM Conguration
` USB Conguration
` Realtek PCIe GBE Family Controller (MAC:74:D4:35:8C:3E:68)
` SIO Conguration
gf: Select Screen
hi: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Boot Save & ExitSecurityChipsetAdvanced