Gigabyte GA-J1800N-D2H - Chipset Configuration

- 24 -
2-4 Chipset
& Realtek LAN Controller
Enables or disables the onboard LAN function. (Default: Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled.
` North Bridge
This section provides information on the installed memory size and memory/onboard graphics-related
congurationoptions.
` IntelIGDConguration
 Thissectionprovidesonboardgraphics-relatedcongurationoptions.
& MAX TOLUD
 AllowsyoutocongurethemaximumTOLUDvalue.(Default:Dynamic)
` South Bridge
` USBConguration
 ThissectionprovidesyouwithcongurationoptionsfortheUSBcontroller,suchasenabling/disablinga
specicUSBportandsupportforcertainfeatures.
` PCIExpressConguration
 ThissectionprovidesyouwithcongurationoptionsforthePCIExpressbus,suchasenabling/disabling
aspecicPCIExpresschannelandspeedconguration.
& Audio Controller
Enables or disables the onboard audio function. (Default: Enabled)
If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to
Disabled.
& High Precision Timer
Enables or disables High Precision Event Timer (HPET) in the operating system. (Default: Enabled)
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Main
Realtek LAN Controller [Enabled]
` North Bridge
` South Bridge
gf: Select Screen
hi: Select Item
[ENTER]-Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
Load Optimized Defaults
Save & Exit
[ESC] Exit
Boot Save & ExitSecurityChipsetAdvanced