Gigabyte GA-J1800N-D2P - Chipset Configuration

- 22 -
& EHCI Hand-off
Determines whether to enable EHCI Hand-off feature for an operating system without EHCI Hand-off
support. (Default: Disabled)
& USB Mass Storage Driver Support
Enables or disables support for USB storage devices. (Default: Enabled)
& Mass Storage Devices
Displays a list of connected USB mass storage devices. This item appears only when a USB storage device
is installed.
` Realtek PCIe GBE Family Controller
This sub-menu provides information on LAN conguration and related conguration options.
2-4 Chipset
& Realtek LAN Controller
Enables or disables the onboard LAN function. (Default: Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled.
` North Bridge
This section provides information on the installed memory size and memory/onboard graphics-related
conguration options.
` IntelIGDConguration
This section provides onboard graphics-related conguration options.
& MAX TOLUD
Allows you to congure the maximum TOLUD value. (Default: Dynamic)
` South Bridge
This section provides information on the installed memory size and memory/onboard graphics-related
conguration options.
` USBConguration
This section provides you with conguration options for the USB controller, such as enabling/disabling a
specic USB port and support for certain features.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Main
Realtek LAN Controller [Enabled]
` North Bridge
` South Bridge
gf: Select Screen
hi: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Boot Save & ExitSecurityChipsetAdvanced