Gigabyte GA-J1800N-D2P - Security Settings

- 24 -
& User Password
Allows you to congure a user password. Press <Enter> on this item, type the password, and then press
<Enter>. You will be requested to conrm the password. Type the password again and press <Enter>.
You must enter the administrator password (or user password) at system startup and when entering BIOS
Setup. However, the user password only allows you to make changes to certain BIOS settings but not all.
To cancel the password, press <Enter> on the password item and when requested for the password, enter
the correct one rst. When prompted for a new password, press <Enter> without entering any password.
Press <Enter> again when prompted to conrm.
& HDDSecurityConguration
Displays a list of connected hard drives and allows you to set a password for a specic hard drive. This
item appears only when a hard drive is installed.
` Secure Boot menu
& System Mode
Displays the current system mode.
& Secure Boot
Displays the current secure boot state.
& Secure Boot
Enables or disables the secure boot function. Secure Boot requires all the applications that are running
during the booting process to be pre-signed with valid digital certicates. This way, the system knows all
the les being loaded before Windows 8 loads and gets to the login screen have not been tampered with.
(Default: Disabled)
& Secure Boot Mode
Allows you to congure the secure boot mode. (Default: Custom)
` Key Management
This section provides you with conguration options for secure boot key management.
2-6 Boot
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Main
Boot Conguration
Setup Prompt Timeout 6
Bootup NumLock State [On]
Full Screen Logo Show [Enabled]
Fast Boot [Disabled]
Boot Option Priorities
Boot Option #1 [UEFI: USB 2.0 USB F ...]
Boot Option #2 [UEFI: Built-in EFI ...]
Hard Drive BBS Priorities
gf: Select Screen
hi: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Boot Save & ExitSecurityChipsetAdvanced