Gigabyte GA-J1800N-D2P - Product Specifications

- 7 -
1-2 ProductSpecications
CPU  Built in with an Intel
®
Dual-Core Celeron
®
J1800 SoC (2.41 GHz)
* Do not disassemble the onboard SoC and the heatsinks by yourself to avoid damage
to these components.
 1 MB Cache
Memory  2 x 1.35V DDR3L DIMM sockets supporting up to 8 GB of system memory
* If only one DDR3L memory module is to be installed, be sure to install it in the
SODIMM_1 socket.
 Dual channel memory architecture
 Support for DDR3L 1333 MHz memory modules
 Support for non-ECC memory modules
Onboard
Graphics
 Integrated in the SoC:
- 1 x D-Sub port, supporting a maximum resolution of 2560x1600
- 1 x HDMI port, supporting a maximum resolution of 1920x1080
Audio  Realtek
®
ALC887 codec
 High Denition Audio
 2/4/5.1/7.1-channel
* To congure 7.1-channel audio, you have to use an HD front panel audio module
and enable the multi-channel audio feature through the audio driver.
 Support for S/PDIF Out
LAN  Realtek
®
GbE LAN chip (10/100/1000 Mbit)
Expansion Slots  1 x PCI slot
Storage Interface  Integrated in the SoC:
- 2 x SATA 3Gb/s connectors
USB  Integrated in the SoC:
- 1 x USB 3.0/2.0 port on the back panel
- 3 x USB 2.0/1.1 ports (1 port on the back panel, 2 ports available through
the internal USB header)
Internal
Connectors
 1 x 24-pin ATX main power connector
 1 x 4-pin ATX 12V power connector
 2 x SATA 3Gb/s connectors
 1 x CPU fan header
 1 x system fan header
 1 x front panel header
 1 x front panel audio header
 1 x S/PDIF Out header
 1 x USB 2.0/1.1 header
 1 x serial port header
 1 x debug card header
 1 x chassis intrusion header
 1 x Clear CMOS jumper
Back Panel
Connectors
 1 x PS/2 keyboard port
 1 x PS/2 mouse port
 1 x D-Sub port
 1 x HDMI port
 1 x parallel port