Gigabyte GA-J3455N-D3H - Page 19

- 19 -
` Realtek PCIe GBE Family Controller (LAN1)
 Thissub-menuprovidesinformationonLANcongurationandrelatedcongurationoptions.
` Realtek PCIe GBE Family Controller (LAN2)
 Thissub-menuprovidesinformationonLANcongurationandrelatedcongurationoptions.
` Trusted Computing
Enables or disables Trusted Platform Module (TPM).
` IT8686SuperIOConguration
 ThissectionprovidesinformationonthesuperI/Ochipandallowsyoutoconguretheserialportand
parallel port.
` Hardware Monitor
& CPU Temperature/System Temperature
Displays current CPU/system temperature.
& CPU/System Fan Speed
Displays current CPU/system fan speeds.
& VCCGI/VCC3/+12V/VCC/Vnn/DDR_VDDQ
Displays the current system voltages.
` SIOMiscFunctions
& AC BACK
Determines the state of the system after the return of power from an AC power loss.
Memory The system returns to its last known awake state upon the return of the AC power.
Always On The system is turned on upon the return of the AC power.
Always Off The system stays off upon the return of the AC power. (Default)
& CaseOpen
Displays the detection status of the chassis intrusion detection device attached to the motherboard CI
header.Ifthesystemchassiscoverisremoved,thiseldwillshow"Open",otherwiseitwillshow"Close."
To clear the chassis intrusion status record, set ResetCaseOpenStatus to Enabled, save the settings
to the CMOS, and then restart your system.
& ResetCaseOpenStatus
Disabled Keeps or clears the record of previous chassis intrusion status. (Default)
Enabled Clears the record of previous chassis intrusion status and the CaseOpeneldwill
show "No" at next boot.
& Case intrusion Prompt
 Allowsyoutodeterminewhethertodisplaychassisintrusionnoticationatsystemstartup.(Default:Disabled)
` CPUConguration
` CPU Power Management
& EIST
Enables or disables Enhanced Intel
®
Speed Step Technology (EIST). Depending on CPU loading, Intel®
EIST technology can dynamically and effectively lower the CPU voltage and core frequency to decrease
average power consumption and heat production. AutoletstheBIOSautomaticallycongurethissetting.
(Default: Enabled)
& Turbo Mode
Allows you to determine whether to enable the Intel
®
CPU Turbo Boost technology. (Default: Enabled)