Gigabyte GA-K8RS482M-FS-02 - 2-3 Integrated Peripherals

GA-K8RS482M-FS-02 Motherboard - 22 -
English
2-3 Integrated Peripherals
OnChip IDE Channel 0
Enabled Enable onboard 1st channel IDE port. (Default value)
Disabled Disable onboard 1st channel IDE port.
OnChip IDE Channel 1
Enabled Enable onboard 2nd channel IDE port. (Default value)
Disabled Disable onboard 2nd channel IDE port.
IDE Prefetch Mode
Enabled Enabled IDE Prefetch mode.
Disabled Disabled IDE Prefetch mode.(Default value)
Onboard Azalia Audio
Enabled Enable Azalia audio function. (Default value)
Disabled Disable Azalia audio function.
Onboard SATA Controller
SATA Disabled Disabled Both Serial ATA controllers.
SATA0 Controller Connectors SATA0/ SATA1 are enabled while SATA2/ SATA3 are disabled.
SATA1 Controller Connectors SATA2/ SATA3 while SATA0/ SATA1 are disabled are enabled
Both Four connectors from SATA0 to SATA3 are all enabled.(Default value)
Onboard SATA Type
Support SATA RAID function
IDE Controller Set onboard SATA type to IDE Controller.(Default value)
RAID Controller Set onboard SATA type to RAID Controller.
Onboard LAN function
Enabled Enable Onboard H/W LAN function. (Default value)
Disabled Disable this function.
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Integrated Peripherals
OnChip IDE Channel0 [Enabled]
OnChip IDE Channel1 [Enabled]
IDE Prefetch Mode [Disabled]
Onboard Azalia Audio [Enabled]
Onboard SATA Controller [Both]
Onboard SATA Type [IDE Controller]
Onboard LAN [Enabled]
Onboard 1394 [Enabled]
On-Chip USB 1.1 Controller [Enabled]
On-Chip USB 2.0 Controller [Enabled]
USB Keyboard Support [Enabled]
USB Mouse Support [Enabled]
Onboard LAN Boot ROM [Disabled]
Onboard Serial Port 1 [3F8/IRQ4]
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F7: Default Setting
Item Help
Menu Level`