GA-K8RS482M-FS-02 Motherboard - 26 -
English
2-6 PC Health Status
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
PC Health Status
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F7: Default Setting
Item Help
Menu Level`
Vcore OK
DDR25V OK
+3.3V OK
+12V OK
Current CPU Temperature 33
o
C
Current CPU FAN Speed 4687 RPM
Current SYSTEM FAN Speed 0 RPM
CPU Warning Temperature [Disabled]
CPU FAN Fail Warning [Disabled]
SYSTEM FAN Fail Warning [Disabled]
CPU Smart FAN Control [Enabled]
Current Voltage(V) Vcore / DDR25V / 3.3V / +12V
Detect system's voltage status automatically.
Current CPU Temperature
Detect CPU temperature automatically.
Current CPU/SYSTEM FAN Speed (RPM)
Detect CPU/SYSTEM fan speed status automatically.
CPU Warning Temperature
60
o
C / 90
o
F Alarm when current temperature over than the selected temperature.
Disabled Don’t monitor current fan temperature.
CPU/SYSTEM FAN Fail Warning(RPM)
Enabled Alarm when FAN stops.
Disabled Don’t monitor current fan speed.
CPU Smart FAN Control
Eabled Enable the CPU Smart FAN Control function. (Default Value)
a. When the CPU temperature is higher than 60 degrees Celsius, CPU fan
will operate at full speed.
b. When the CPU temperature is between 40 and 60 degrees Celsius, the
CPU fan speed will change depending on the actual CPU temperature.
c. When the CPU temperature is lower than 40 degrees Celsius, CPU fan
will keep turning at lower speed.
Disabled Disable the CPU Smart FAN Control function.