GA-M720-ES3 Motherboard - 36 -
NVIDIA Core Calibration
Allows you to determine whether to enable NVIDIA Core Calibration when using an AMD Black
Edition CPU. We recommend that you enhance heat dissipation for the CPU VRM area if you
enable this function.
Disabled Disables this function. (Default)
Auto Lets the BIOS to configure the settings to defaults.
All Cores Configures NVIDIA Core Calibration for all CPU cores.
Per Core Individually configures NVIDIA Core Calibration for each CPU core.
Core 0 NVCC Percentage
This option is configurable only when NVIDIA Core Calibration is set to All Cores.
Options are: -12%~+12%.
Core 1 NVCC Percentage, Core 2 NVCC Percentage, Core 3 NVCC Percentage
This option is configurable only when NVIDIA Core Calibration is set to Per Core.
Options are: -12%~+12%.
CPU Frequency
Allows you to manually set the CPU host frequency.
Important It is highly recommended that the CPU frequency be set in accordance with the CPU
specifications.
HT Link Frequency
Allows you to manually set the frequency for the HT Link between the CPU and chipset.
Auto BIOS will automatically adjust the HT Link Frequency. (Default)
200 MHz~1.0 GHz Sets HT Link Frequency to 200 MHz~1.0 GHz.
PCIE Clock
Allows you to manually set the PCIe clock frequency. The adjustable range is from 100 MHz to
200 MHz. (Default: 100)
CPU Clock Ratio
Allows you to alter the clock ratio for the installed CPU. The adjustable range is dependent on the
CPU being used.
CPU NorthBridge Freq.
(Note)
Allows you to alter the North Bridge controller frequency for the installed CPU. The adjustable
range is dependent on the CPU being used.
Robust Graphics Booster
Enables or disables the control of VGA Core clock.
VGA Core Clock
Allows you to alter the core clock for the graphics chip and is configurable only if the Robust
Graphics Booster option is set to Enabled. The core clock can be increased by 1% ~ 50%.
To Next Page
Loading...
