- 39 - BIOS Setup
(Note) This item is present only if you install a CPU that supports this feature.
********
System Voltage Optimized
********
System Voltage Control
Determines whether to manually set the system voltages. Auto lets BIOS automatically set the
system voltages as required. Manual allows all voltage control items below to be configurable.
(Default: Auto)
DDR2 Voltage Control
Allows you to set memory voltage.
Normal Supplies the memory voltage as required. (Default)
+0.10V ~ +0.30V Increases memory voltage by 0.10V to 0.30V at 0.1V increment.
Chipset/PCIE Voltage
Allows you to set the voltage of the PCI Express bus.
Normal Supplies the Northbridge voltage as required. (Default)
+0.1V ~ +0.2V Increases memory voltage by 0.1V to 0.2V at 0.1V increment.
HT-Link Voltage
Allows you to set the voltage of the HT-Link.
Normal Supplies the Northbridge voltage as required. (Default)
+0.1V ~ +0.2V Increases memory voltage by 0.1V to 0.2V at 0.1V increment.
CPU NB VID Control
(Note)
Allows you to set the CPU North Bridge voltage. Normal sets the CPU North Bridge voltage as
required. The adjustable range is dependent on the CPU being installed. (Default: Normal)
Note: Increasing CPU North Bridge voltage may result in damage to your CPU or reduce the useful
life of the CPU.
CPU Voltage Control
Allows you to set the CPU voltage. Normal sets the CPU voltage as required. The adjustable
range is dependent on the CPU being installed. (Default: Normal)
Note: Increasing CPU voltage may result in damage to your CPU or reduce the useful life of the
CPU.
Normal CPU Vcore
Displays the normal operating voltage of your CPU.
To Next Page
Loading...
