- 45 - BIOS Setup
Frame Buffer Size
Frame buffer size is the total amount of system memory allocated solely for the onboard graphics
controller. MS-DOS, for example, will use only this memory for display. This item is configurable
only if the iGPU Frame Buffer Control option is set to Manual.
Options are: 128M (default), 256M, 512M. (Only 256M and 512M are available for selection when
Hybrid SLI is enabled.)
Onboard GPU
Enables or disables the onboard VGA function.
Enable If No Ext PEG
Activates the onboard VGA only if no PCI Express VGA card is installed. (Default)
Always Enable
Always activates the onboard VGA, whether or not a PCI Express card is installed. If you wish to
set up a dual view configuration, set this item to Always Enable. This item is automatically set to
Always Enable when Hybrid SLI is enabled.
To Next Page
Loading...
