Gigabyte GA-MA74GM-S2 - Page 84

Appendix - 84 -
Step 2:
Connect an audio device to an audio jack. The The cur-
rent connected device is dialog box appears. Select the
device according to the type of device you connect. Then
click OK.
Step 3:
On the Speakers screen, click the Speaker Congura-
tion tab. In the Speaker Conguration list, select Stereo,
Quadraphonic, 5.1 Speaker, or 7.1 Speaker according to
thetypeofspeakercongurationyouwishtosetup.Then
the speaker setup is completed.
B. Conguring Sound Effect
YoumaycongureanaudioenvironmentontheSound Effects tab.
The pictures to the right show the 7.1-channel speaker
congurations.
7.1-Channel Speakers:
Center/Sub-
woofer
Speaker Out
Front Speaker
Out
Rear Speaker
Out
Side Speaker
Out