Gigabyte GA-MA770-ES3 - Product Specifications

Hardware Installation - 10 -
1-2 Product Specications
CPU

Support for AM3/AM2+/AM2 processors:
AMD Phenom
™
II processor/ AMD Phenom
™
processor/
AMD Athlon
™
II processor/ AMD Athlon
™
processor/
AMD Sempron
™
processor
(Go to GIGABYTE's website for the latest CPU support list.)
Hyper Transport Bus

5200/2000 MT/s
Chipset

 North Bridge: AMD 770


 South Bridge: AMD SB710
Memory

2 x 1.8V DDR2 DIMM sockets supporting up to 8 GB of system memory
(Note 1)

Dual channel memory architecture

Support for DDR2 1200(O.C.)/1066
(Note 2)
/800 MHz memory modules


 (Go to GIGABYTE's website for the latest memory support list.)

Support for ECC memory modules
(Note 3)
Audio
   
Realtek ALC888/892 codec

High Denition Audio

2/4/5.1/7.1-channel
(Note 4)

Support for S/PDIF In/Out

Support for CD In
LAN

1 x Realtek RTL8111D chips (10/100/1000 Mbit)
Expansion Slots

1 x PCI Express x16 slot, running at x16
(The PCI Express x16 slot conforms to PCI Express 2.0 standard.)

4 x PCI Express x1 slots

2 x PCI slots
Storage Interface

South Bridge:
- 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
- 6 x SATA 3Gb/s connectors supporting up to 6 SATA 3Gb/s devices
- Support for SATA RAID 0, RAID 1, RAID 10, and JBOD

iTE IT8720 chip:
- 1 x oppy disk drive connector supporting up to 1 oppy disk drive
USB

South Bridge:
- Up to 12 USB 2.0/1.1 ports (8 on the back panel, 4 via the USB brackets
connected to the internal USB headers)