Appendix- 87 -
B. S/PDIF Out:
The S/PDIF Out jacks can transmit audio signals to an external decoder for decoding to get the best
audio quality.
1. Connecting a S/PDIF Out Cable
Connect a S/PDIF coaxial cable or a S/PDIF optical cable (either one) to an external decoder for
transmitting the S/PDIF digital audio signals.
S/PDIF Coaxial Cable
S/PDIF Optical Cable
2. Configuring S/PDIF Out:
On the Digital Output(Optical) screen
(Note)
, click the Default Format tab and then select the sample rate and
bit depth. Click OK to complete.
(Note) Enter the Digital Output(Optical) screen to configure further settings if you use the S/PDIF
Out connector(s) on the back panel for digital audio output or enter the Digital Output screen
if you use the internal S/PDIF Out connector (SPDIF_OUT) for digital audio output.
To Next Page
Loading...
