- 57 - BIOS Setup
English
System Voltage Control
Determines whether to manually set the system voltages. Auto lets BIOS automatically set the
system voltages as required. Manual allows all voltage control items below to be configurable.
(Default: Auto)
CPU Voltage Control
Allows you to set the CPU voltage. Normal sets the CPU voltage as required. The adjustable
range is dependent on the CPU being installed. (Default: Normal)
Note: Increasing CPU voltage may result in damage to your CPU or reduce the useful life of the
CPU.
Normal CPU Vcore
Displays the normal operating voltage of your CPU.
DDR2 Voltage Control
Allows you to to set memory voltage.
Normal Supplies the memory voltage as required. (Default)
+0.05V ~ +0.50V Increases memory voltage by 0.05V to 0.50V at 0.05V increment.
Chipset Voltage Control
Allows you to set the Chipset voltage.
Normal Supplies the Chipset voltage as required. (Default)
+0.05V ~ +0.40V Increases Chipset voltage by 0.05V to 0.40V at 0.05V increment.
PCIE OverVoltage Control
Allows you to to set PCIe voltage.
Normal Supplies the PCIe bus voltage as required. (Default)
+0.05V ~ +0.45V Increases PCIe bus voltage by 0.05V to 0.45V at 0.05V increment.
HTT Voltage Control
Allows you to to set Hyper Transport Transmit Voltage.
Normal Supplies the Hyper Transport Transmit voltage as required. (Default)
+0.05V ~ +0.40V Increases Hyper Transport Transmit voltage by 0.05V to 0.40V at 0.05V
increment.
HTR OverVoltage Control
Allows you to to set Hyper Transport Receive voltage.
Normal Supplies the Hyper Transport Receive voltage as required. (Default)
+0.05V ~ +0.45V Increases Hyper Transport Receive voltage by 0.05V to 0.45V at 0.05V
increment.
To Next Page
Loading...
