- 51 - BIOS Setup
AHCI Configures the SATA controller to AHCI mode. Advanced Host Controller
Interface (AHCI) is an interface specification that allows the storage driver to
enable advanced Serial ATA features such as Native Command Queuing and
hot plug.
RAID Enables RAID for the SATA controller.
Onboard Audio Function
Enables or disables the onboard audio function. (Default: Enabled)
If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item
to Disabled.
Onboard LAN device
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
Onboard LAN device
Item Help
Menu Level
Green LAN [Disabled]
Onboard LAN1 Function [Enabled]
Onboard LAN1 Boot ROM [Disabled]
SMART LAN1 [Press Enter]
Onboard LAN2 Function [Enabled]
Onboard LAN2 Boot ROM [Disabled]
SMART LAN2 [Press Enter]
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Green LAN
When the onboard LAN function and Green LAN are enabed, the system will dynamically detects
if a LAN cable is connected or not. If not, the corresponding LAN controller will be disabled
automatically. (Default: Disabled)
Onboard LAN1/2 Function (LAN1/2 Port)
Enables or disables the onboard LAN function. (Default: Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item
to Disabled.
Onboard LAN1/2 Boot ROM (LAN1/2 Port)
Allows you to decide whether to activate the boot ROM integrated with the onboard LAN chip.
(Default: Disabled)
To Next Page
Loading...
