GA-MA790GP-DS4H Motherboard - 84 -
Step 4:
After the SATA RAID/AHCI driver installation is completed, you can proceed with the W indows XP
installation.
Figure 5
WindowsXP Professional Setup
Enter= Continue R=Repair F3=Exit
Welcome to Setup.
This port of the Setup program prepares Microsoft(R)
Windows (R) XP to run on your computer.
To set up Windows XP now, press ENTER.
To repair a Windows XP installation using
Recovery Console, press R.
To quit Setup without installing Windows XP, press F3.
To Next Page
Loading...
