Gigabyte GA-P75-D3 - Configuring S;PDIF out

Appendix - 74 -
5-1-2 ConguringS/PDIFOut
The S/PDIF Out jack can transmit audio signals to an external decoder for decoding to get the best audio
quality.
(Note) Enter the DigitalOutput(RCA) screen to configure further settings if you use the S/PDIF Out connector
on the back panel for digital audio output or enter the DigitalOutput screen if you use the internal S/
PDIF Out connector (SPDIF_O) for digital audio output.
2.ConfiguringS/PDIFOut:
On the DigitalOutput(RCA) screen
(Note)
, click the DefaultFormat tab and then select the sample rate and bit
depth. Click OK to complete.
1.ConnectingaS/PDIFOutCable:
Connect a S/PDIF coaxial cable to the corresponding S/PDIF out connector as shown below and an external
decoder for transmitting the S/PDIF digital audio signals.
Connects to a S/PDIF coaxial cable