EasyManua.ls Logo

Gigabyte GA-Q87M-MK - Page 29

Gigabyte GA-Q87M-MK
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 29 -
& SATA Mode Selection
Enables or disables RAID for the SATA controllers integrated in the Chipset or congures the SATA control-
lers to AHCI mode.
IDE Congures the SATA controller to IDE mode.
RAID Enables RAID for the SATA controller.
AHCI Congures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specication that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug. (Default)
` Serial ATA Port 0/1/2/3/4/5
& Port 0/1/2/3/4/5
Enables or disables each SATA port. (Default: Enabled)
& Hot plug
Enables or disable the hot plug capability for each SATA port. (Default: Disabled)
& External SATA
Enables or disables support for external SATA devices. (Default: Disabled)
` Intel(R)Anti-TheftTechnologyConguration
This section allows you to enable/disable Intel
®
Anti-Theft Technology (Intel
®
AT), a hardware-based
anti-theft protection solution, and provides you with related conguration options.
` AMTConguration
This section allows you to enable/disable Intel
®
Active Management Technology (Intel
®
AMT) for remote
computer management on hardware level and provides you with further conguration options.
` SuperIOConguration
This section provides information on the super I/O chip and allows you to congure the serial port and
parallel port.
& Serial Port A/B
Enables or disables the onboard serial port. (Default: Enabled)
& Parallel Port
Enables or disables the onboard parallel port. (Default: Enabled)
& Device Mode
This item is congurable only when Parallel Port is set to Enabled. It allows you to select an operating
mode for the onboard parallel (LPT) port. Options are: Standard Parallel Port Mode (Default), EPP Mode
(Enhanced Parallel Port), ECP Mode (Extended Capabilities Port), EPP Mode & ECP Mode.
` Intel(R) Smart Connect Technology
& ISCT Support
Enables or disables Intel
®
Smart Connect Technology. (Default: Disabled)
` Serial Port Console Redirection
This section allows you to enable/disable serial port console redirection for remote server management
through a serial port.
` Intel(R) Ethernet Network Connection
This sub-menu provides information on LAN conguration and related conguration options.
` Intel(R) Ethernet Network Connection
This sub-menu provides information on LAN conguration and related conguration options.

Related product manuals