Gigabyte GA-X58A-UD9 - Fdd (Floppy Disk Drive Connector)

- 31 - Hardware Installation
• Be sure to connect fan cables to the fan headers to prevent your North Bridge from overheat-
ing. Overheating may result in damage to the North Bridge.
• These fan headers are not congurationjumperblocks. Do not place a jumper cap on the
headers.
PinNo. Denition
1 GND
2 +12V
3 NC
7) NB_FAN (North Bridge Fan Header)
Connect the North Bridge fan cable to this header. The fan header has a foolproof insertion design.
When connecting a fan cable, be sure to connect it in the correct orientation. Most fans are designed
with color-coded power connector wires. A red power connector wire indicates a positive connection and
requires a +12V voltage. The black connector wire is the ground wire.
1
8) FDD (Floppy Disk Drive Connector)
 Thisconnectoris usedtoconnecta oppydiskdrive.Thetypesof oppydiskdrivessupported are:
360KB,720KB,1.2MB,1.44MB,and2.88MB.Beforeconnectingaoppydiskdrive,besuretolocate
pin1oftheconnectorandtheoppydiskdrivecable.Thepin1ofthecableistypicallydesignatedbya
stripeofdifferentcolor.Forpurchasingtheoptionaloppydiskdrivecable,pleasecontactthelocaldealer.
1
2
33
34