Gigabyte GA-Z170X-SOC Force - Page 52

BIOS Setup
- 52 -
& VAXG Loadline Calibration
Allows you to set the Load-Line Calibration level for the CPU VAXG voltage. The levels are (from highest
tolowest):Extreme,Turbo,High,Medium,Low,andStandard.SelectingahigherlevelkeepstheCPU
VAXG voltage more consistent with what is set in BIOS under heavy load. Auto lets the BIOS automatically
congurethissettingandsetsthevoltagefollowingIntel'sspecications.(Default:Auto)
& CPU Vcore Protection
Allows you to set the over-current protection level for the CPU Vcore voltage. The adjustable range is from
150.0mV to 400.0mV. AutoletstheBIOSautomaticallycongurethissetting.(Default:Auto)
& DDR CH(A/B) Voltage Protection
Allows you to set the over-current protection level for Channel A and Channel B memory voltage. The
adjustable range is from 200.0mV to 500.0mV. AutoletstheBIOSautomaticallycongurethissetting.
(Default:Auto)
& VAXG Protection
Allows you to set the over-current protection level for the CPU VAXG voltage. The adjustable range is from
150.0mV to 400.0mV. AutoletstheBIOSautomaticallycongurethissetting.(Default:Auto)
& CPU Vcore Current Protection
Allows you to set the over-current protection level for the CPU Vcore voltage.
Auto    LetstheBIOSautomaticallycongurethissetting.(Default)
Standard~Extreme Selects Standard, Low, Medium, High, Turbo, or Extreme which represents different
level of over-current protection for the CPU Vcore voltage.
& DDR CH(A/B) Current Protection
Allows you to set the over-current protection level for Channel A and Channel B memory voltage.
Auto    LetstheBIOSautomaticallycongurethissetting.(Default)
Standard~Extreme Selects Standard, Low, Medium, High, Turbo, or Extreme which represents different
level of over-current protection for the memory voltage.
& VAXG Current Protection
Allows you to set the over-current protection level for the CPU VAXG voltage.
Auto    LetstheBIOSautomaticallycongurethissetting.(Default)
Standard~Extreme Selects Standard, Low, Medium, High, Turbo, or Extreme which represents different
level of over-current protection for the memory voltage.
& DDR VPP CH(A/B) Current Protection
Allows you to set the over-current protection level for memory VPP voltage.
Auto    LetstheBIOSautomaticallycongurethissetting.(Default)
Standard~Extreme Selects Standard, Low, Medium, High, Turbo, or Extreme which represents different
level of over-current protection for the memory VPP voltage.
& CPU Vcore PWM Switch Rate
Allows you to set the PWM frequency for the CPU Vcore voltage. The adjustable range is from 300.0KHz
to500.0KHz.(Default:Auto)
& DDR CH(A/B) PWM Switch Rate
Allows you to set the PWM frequency for Channel A and Channel B memory. The adjustable range is from
300.0KHzto500.0KHz.(Default:Auto)