Gigabyte GA-Z68AP-D3 - Page 42

BIOS Setup - 42 -
>>> CPU
Multi-Steps Load-Line
Enables or disables Load-Line Calibration. This item allows you to adjust Vdroop at different levels. Enabling
Load-Line Calibration may keep the CPU voltage more constant under light and heavy CPU load.
Disabled   Disables Load-LineCalibration andsets VDroop followingIntel specications.
(Default)
Level 1~Level 10 Enables Load-Line Calibration and adjusts VDroop by ten levels.
CPU Vcore
The default is Auto.
Dynamic Vcore(DVID)
 ThisoptioniscongurableonlywhenCPU Vcore is set to Normal. The default is Auto.
QPI/Vtt Voltage
The default is Auto.
System Agent Voltage
The default is Auto.
Graphics Core
The default is Auto.
Graphics DVID
 ThisoptioniscongurableonlywhenGraphics Core is set to Normal. The default is Auto.
>>> MCH/ICH
CPU PLL
The default is Auto.
DRAM Voltage
The default is Auto.
DRAM VRef.
The default is Auto.
DRAM Termination
The default is Auto.
Ch-A Data VRef.
The default is Auto.
Ch-B Data VRef.
The default is Auto.
Ch-A Address VRef.
The default is Auto.
Ch-B Address VRef.
The default is Auto.