BIOS Setup - 48 -
Audio Controller &
Enables or disables the onboard audio function. (Default: Enabled)
If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to
Disabled.
Init Display First &
Specifes the frst initiation of the monitor display from the installed PCI graphics card, PCI Express graphics
card, or the onboard graphics.
Auto Lets BIOS automatically congure this setting. (Default)
IGFX Sets the onboard graphics as the rst display.
PEG Sets the PCI Express graphics card on the PCIEX16 slot as the rst display.
PCI Sets the graphics card on the PCI slot as the rst display.
Internal Graphics &
Enables or disables the onboard graphics function. (Default: Auto)
Internal Graphics Memory Size &
Allows you to set the onboard graphics memory size. Options are: 32M~1024M. (Default: 64M)
DVMT Total Memory Size &
Allows you to allocate the DVMT memory size of the onboard graphics. Options are: 128M, 256M, MAX.
(Default: MAX)
Intel(R) Rapid Start Technology &
Enables or disables Intel Rapid Start Technology. This item is congurable only when an SSD is installed.
(Default: Disabled)
Legacy USB Support &
Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled)
USB3.0 Support &
Enables or disables the integrated USB 3.0 controller. (Default: Enabled)
XHCI Hand-off &
Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off
support. (Default: Enabled)
EHCI Hand-off &
Determines whether to enable EHCI Hand-off feature for an operating system without EHCI Hand-off
support. (Default: Disabled)
Port 60/64 Emulation &
Enables or disables emulation of I/O ports 64h and 60h. This should be enabled for full legacy support
for USB keyboards/mice in MS-DOS or in operating system that does not natively support USB devices.
(Default: Disabled)
USB Storage Devices &
Displays a list of connected USB mass storage devices. This item appears only when a USB storage device
is installed. (Default: Auto)
Trusted Computing `
TPM SUPPORT &
Enables or disables Trusted Platform Module (TPM). Set this item to Enable when a TPM device is installed.
(Default: Disable)
To Next Page
Loading...
