Gigabyte GA-Z77M-D3H - Page 89

- 89 - Appendix
The pictures to the right show the 7.1-channel speaker
congurations.
7.1-Channel Speakers:
Center/Subwoofer
Speaker Out
Front Speaker Out
Rear Speaker Out
Side Speaker Out
Step 2:
Connect an audio device to an audio jack. The Please select
a function dialog box appears. Select the device according
to the type of device you connect. Then click OK.
Step 3:
Go to the Speaker screen. On the Speaker Setting and
Test tab, select 2, 4, 6, or 8-channel speaker according to
the type of speaker conguration you wish to set up. Then
the speaker setup is completed.
B. Conguring Sound Effect
You can congure an audio environment on the Environmental Modeling tab.