Gigabyte GA-Z77X-UP4 TH - Page 43

- 43 -
BIOS Setup
` 3D Power Control
& PWM Phase Control
Allows you to automatically change the PWM phase according to the CPU load. The power-saving
levels are (from lowest to highest): eXm Perf (Extreme Performance ), High Perf (High Performance),
Perf (Performance), Balanced, Mid PWR (Mid Power), and Lite PWR (Light Power). Auto lets the BIOS
automaticallycongurethissetting.(Default:Auto)
& Vcore Voltage Response
 AllowsyoutoconguretheresponsetimeforVcorechangesusingpresetlevels.
Auto    LetsBIOSautomaticallycongurethissetting.(Default)
Standard~Fast Selects Standard or Fast which represents different levels of the response time
for Vcore changes.
& Vcore Loadline Calibration
Allows you to set the Load-Line Calibration level for the Vcore. The levels are (from highest to lowest):
Extreme, Turbo, High, Medium, Low, and Standard. Selecting a higher level keeps the Vcore more consistent
with what is set in BIOS under heavy load. AutoletstheBIOSautomaticallycongurethissettingandsets
thevoltagefollowingIntel'sspecications.(Default:Auto)
& GFX Voltage Loadline Calibration
Allows you to set the Load-Line Calibration level for the GFX voltage. The levels are (from highest to lowest):
Extreme, Turbo, High, Medium, Low, and Standard. Selecting a higher level keeps the GFX voltage more
consistent with what is set in BIOS under heavy load. AutoletstheBIOSautomaticallycongurethissetting
andsetsthevoltagefollowingIntel'sspecications.(Default:Auto)