Gigabyte GA-Z87X-UD3H - Page 40

BIOS Setup
- 40 -
` M.I.T. Current Status
This screen provides information on CPU/memory frequencies/parameters.
` Advanced Frequency Settings
& CPU/PCIe Base Clock
 AllowsyoutomanuallysettheCPUbaseclockandPCIebusfrequencyin0.01MHzincrements.(Default:
Auto)
Important: It is highly recommended that the CPU frequency be set in accordance with the CPU
specications.
& Host Clock Frequency
 Allowsyoutomanuallysetthehostclockfrequency(whichcontrolsCPU,PCIe,andmemoryfrequencies)
in0.01MHzincrements.
 ThisitemiscongurableonlywhenCPU/PCIe Base Clock is set to Manual.
& Processor Base Clock (Gear Ratio)
 AllowsyoutoconguretheProcessor Base Clock by multiplying the Host Clock Frequency by several
presethostclockmultipliers.ThisitemiscongurableonlywhenCPU/PCIe Base Clock is enabled.
& Host/PCIe Clock Value
This value is determined by multiplying the Host Clock Frequency value by the Processor Base
Clock(Gear Ratio) value.
& Processor Graphics Clock
 Allowsyoutosettheonboardgraphicsclock.Theadjustablerangeisfrom400MHzto4000MHz.(Default:
Auto)
& CPU Clock Ratio
Allows you to alter the clock ratio for the installed CPU. The adjustable range is dependent on the CPU
being installed.
& CPU Frequency
Displays the current operating CPU frequency.